I am using 12.04 on a Windows network and this is what worked for me:. Download the bizhub 423 Linux drivers from. Add new printer and select the Konica Minolta 423 (it should appear as a network printer). Ubuntu will search for drivers, but eventually will ask you to provide a PPD. Navigate to the downloaded driver file and install: 423SeriesLinuxv/CUPS1.2/English/KO423UX.ppd.

• Driver Imprimante Canon I250
• Imprimante Hp
• Installer Imprimante Canon

Driver Imprimante Canon I250

Ignore the installable options (paper source unit, etc) and click OK - you can come back to them later if needs be. At this point I still had no communication with the printer so I changed the device URI (under Printer Properties) to lpd://192.168.1.3/print. You may need to replace 192.168.1.3 with whatever your printer's IP address is, but once I got this right it was printing. This is just to inform you that this procedure works fine under Ubuntu 16.04 LTS. There was no driver for our Konica Minolta Bizhub c224e, but I selected the driver 'KONICA MINOLTA 500/420/360PS(P)' that was available on the list and works like a charm printing in full colour.

Just remember to change Device URI from the default one to something like lpd://10.1.0.13/print - you can check the IP address in the menu on the printer display. Another trick is to know what printer options are installed and enable them in the driver's menus. In my case these were additional paper bins and duplex.

Contents. Discussion of this wiki can be found Introduction This printer has a great and easy install method for Ubuntu. Unfortunately, it does not install all of the tools that the Windows version does but it will allow you to print with wireless and scan (wired only I believe) with its software scangearmp.

This how to is for the wireless printer only. The download says 10.04 only but it has worked for me on 10.04 32 and 11.04 64bit, too - Also, check out the tweaks at the end of this post if you want more flexibility with resolutions and grayscale. (this is just a note in case you get an error in the install because you had a previous pixma printer installed like a 32 bit forced onto a 64bit architecture. I had to uninstall my mx330 like this and then all was good:) sudo dpkg -r cnijfilter-common:i386 3.10-1 (For wireless conectivity, I use a router with WPS button. Download and Install Driver.

Imprimante Hp

That can be setup easily from the printer. The manual shows how to do this on p.46. If you have one, do this step first before installation and Linux will see your printer in the install. (If you don't have WPS then there is another method but I haven't used it - check with manual) From printer console: Settings:LAN Settings:WLAN Active:OK:Wireless LAN setup: WPS push button method: Go press WPS button for 5 seconds on router: Now click OK within 2 minutes on printer.). Download drivers from. Place them in your Home folder. Untar the file (named something like Linux IJ Printer Driver MX410.tar) by double clicking on it - this will place all of the files in your home folder - some you will not need but just follow the instructions below and it will pick the correct ones for you.

You can untar the guide and the deb.tar.gz files and then install the guide and follow the directions (you can skip the preparation step in Ubuntu I believe, I did). Or you can see them consolidated here below:. Expanding the archived file and switching to the expanded directory (on mine I had to replace the 3.50-x below with 3.50-1) tar zxvf cnijfilter-mx410series-3.50-x-deb.tar.gz cd cnijfilter-mx410series-3.50-x-deb 3.

Installing the printer driver sudo./install.sh. When the installation is completed, a message instructing you to register the printer is displayed. Next, register the printer to the computer. Connect the printer, and then turn on the power.

To use the printer on the network, connect the printer to the network. When the printer is ready, press the Enter key. Check that the machine is properly connected and that the power is on.

Installer Imprimante Canon

Then press the Enter key. Select the connection method Select the connection method for this machine. Select the connection method to be used, and then press Enter. 1) USB 2) Network Select the connection method.1 For a USB connection, enter '1' and press the Enter key. For a network connection, enter '2' and press the Enter key.

The default selection value is displayed in. Select the printer From the list of detected printers, select the printer to be registered. (1) Example when USB is selected Select the printer.

If the printer you want to use is not listed, select Update 0 to search again. To cancel the process, enter Q. 0) Update. Target printers detected 1) Canon MX410 series (/dev/usb/lp0). Currently selected:1 Canon MX410 series (/dev/usb/lp0) Enter the value. 1 Enter the number of the printer to be registered, and then press Enter. Good Luck - This is a great printer for the money and very sturdy.

I had the 330mx until I spilled coffee on it, it was a tank. BTW don't put any beverages by this bad boy - the top has no lid because of the ADF slot so everything goes right to the inside if something is spilled - it is no good, trust me! = Here's some tweaks as well = Go to admin - printers and duplicate the printer about two or three times.